Female 3.5mm Harness LD-SWC-F3.5 for Axxess GMOS-100 & ASWC-1 FEMALE 3.5mm Jack

Description

Female 3.5mm Harness LD-SWC-F3.5 FEMALE 3.5mm Jack for Metra Axxess Steering weel control interface ASWC, ASWC-1,  AXSWC& ASWC-1 .
This is just the replacement harness adapter for the interface
steering wheel controls module is not sold in this auction.
Application Instructions from manufacturers website
F3.5mm adapter:
• Parrot: Follow AXSWCH-PAR (sold separately) instructions.
• For the radios listed below:
Connect the 3.5mm adapter, to the male 3.5mm SWC jack from the AXSWC (sold separately)harness.
Any remaining wires tape off and disregard.
• Eclipse: Connect the steering wheel control wire, normally Brown, to the Brown/White wire from the connector. Then connect the remaining steering wheel control wire, normally Brown/White, to the Brown wire from the connector.
• MetraOE: Connect the steering wheel control Key 1 wire (Gray) to the Brown wire.
• Kenwoodorselect JVC with a steering wheel control wire: Connect the Blue/Yellow wire to the Brown wire.
Note: If the Kenwood radio auto detects as a JVC, manually set the radio type to Kenwood.
See the instructions under Changing Radio Type.
• XITE: Connect the steering wheel control SWC-2 wire from the radio to the Brown wire.
• Universal “2 or 3 wire” radio: Connect the steering wheel control wire, referred to as Key-A or SWC-1, to the Brown wire from the connector.
Then connect the remaining steering wheel control wire, referred to as Key-B or SWC-2, to the Brown/White wire from  the connector.
If the radio comes with a third wire for ground, disregard this wire.
Note: After the interface has been programmed to the vehicle, refer to the manual provided with the radio for assigning the SWC buttons.
Contact the radio manufacturer for more information.
Any questions about the item please ask us before you buy